How is regular maintenance performed on a crane?

Mechanical Parts: Inspect and lubricate bearings, gears, and other moving parts, ensuring there is no excessive wear or looseness. Electrical System: Check the cables, controllers, and motor connections to ensure they are not loose or damaged, and test the electrical system's functionality. Hydraulic System: Check the hydraulic oil level and quality, replace contaminated or degraded hydraulic oil promptly, and inspect hydraulic lines and fittings to prevent leaks. Wire Ropes and Rigging: Regularly inspect the ...

How do I determine the right crane for my project?

The choice of crane depends on factors such as the weight and dimensions of the load, the height and distance the load needs to be moved, the working environment, and any specific site constraints. If you have any questions about choosing cranes, please feel free to ask us！

What are the power of single-girder cranes?

In industrial production, single-girder cranes are commonly installed and used. However, many people are not very familiar with the power requirements of single-girder cranes. Here's a brief introduction to help you understand better. Single-girder cranes have standard lifting capacities of 1 ton, 2 tons, 3 tons, 5 tons, 10 tons, 16 tons, 20 tons, and 32 tons. Common spans range from 7 to 30 meters. The motors used in single-girder cranes can vary depending on the lifting capacity and span. Different types of single-girder ...

How to effectively prevent corrosion of gantry cranes outdoor？

To effectively prevent corrosion of gantry cranes in outdoor environments, the following measures can be taken: Surface treatment: Cleaning: Before any anti-corrosion measures, thoroughly clean the surface of the gantry crane to remove rust, dirt, and grease. Sandblasting or mechanical grinding is usually used to remove rust and old coatings. Grinding: For metal surfaces, grinding can improve the adhesion of the coating. Coating protection: Primer: After cleaning the metal surface, apply a layer of...

The hazards associated with cranes include what？

Crushing and Collisions This refers to the occurrence of crushing and collisions involving personnel during the operation of cranes and gantry cranes. Such incidents are common and extremely hazardous in crane operations, often resulting in severe consequences, including fatalities. The main scenarios include: (1) Swinging Load Crushing and Collision: This occurs when a swinging load crushes or collides with personnel during crane operation. The primary causes are improper operation by the driver, leading to sudden speed changes ...

What are the overload limiters for single girder cranes?

The overload limiters for single girder cranes mainly include the following types: Mechanical Overload Limiters: Lever-type Overload Limiter: Uses a lever mechanism to sense the load weight. When overloaded, it triggers an alarm or cuts off the power. Spring-type Overload Limiter: Senses load changes through spring deformation. When the preset overload value is reached, it triggers an alarm or protective device. Electronic Overload Limiters: Strain Gauge Overload Limiter: Measures load weight using strain gauge senso...